Phil Wood Spoke Cutting and Threading Machine

Phil Wood Spoke Cutting and Threading Machine

The Phil Wood Spoke Cutting and Threading Machine is designed and manufactured to provide an invaluable tool to manually size, cut, and place a factory-quality thread on a spoke within a few seconds. The thread is rolled/cold forged onto the spoke, which does not remove material and would occur if the thread were cut into the spoke.

The machine performs through the operation of a manual crank. One revolution of the machine handle both cuts and threads the spoke. It is designed to cut and thread 1.8 mm (15 ga.) ad 2.0 mm (14 ga.) spokes and place 10 mm of 56 tpi thread on the end of each spoke. A spacer to set the machine to cut 2.3 mm (13 ga.) is available, though is not offered as a standard component.

Our machine is capable of cutting carbon steel, stainless steel, titanium, anodized, and powdercoated spokes. Butted and aero spokes can be cut and threaded on the full diameter portion of the spoke.

is profiling itself as
“On the Cutting Edge”

The experience and expertise of head mechanic Nick Smith will come in handy building or repairing any training, fixie or race wheel to your specifications.
This Spoke Cutting and Threading Machine makes keeping a multitude of different sized spokes obsolete. Therefore it’ll speed up the process of building or repairing wheels.
Just one more example to show Precision Bikes is on top of their game, as far as customer service is concerned…


Comments are closed.